machine launched last podryw This is the last part of photos from notesomanii. Today I present to you the kursik previously announced that everyone could afford at home to prepare their own notes. You'll see how it works:) And now the last photos notesików for preschoolers:
notebooks I used to do: on the cover of cardboard, paper Kartos, colored corrugated cardboard, acrylic dots and inscriptions from the extruder, decorative tape with scale (from the store Frantic Stamper), dratwy, stamping with Lemonade and bells ... with chocolate rabbits;)
And now, step by step I'll show you how to handle the preparation of such a notebook. To make the database
notebook need:
- cardboard (cut to size to allow two of our notebook-size pieces),
- paper for lining the covers,
- introligatorskiego glue,
- a piece of spring and bindownicy to bind the cover
- a knife with a sharp blade (eg, wallpaper), rulers, pads,
- the center of the notebook paper (should be about 0.5 cm smaller than the covers).
Using a knife - for example such as the wallpaper - we cut the line (for a protective pad) on the cardboard pieces selected by our size. For each pad you need 2 pieces (one front and one in back).
Then our chosen decorative paper cut out two rectangles more about 1-1.5 cm on each side of our cardboard and 2 cardboard pieces smaller than about 0.5 cm on each side. Larger piece of paper is placed on the mat to the bottom of the specimen, and on it in the middle of the first arrange the tekturkę. Bent decorative paper according to the diagram below, the first curving "horns" (1), then the sides (2). Horns or we can cut with a knife at a distance of 1mm from the dotted line, or leave. I this time I left.
Then thoroughly cover the edges with glue, bent as shown in Figure (1) and a button to cardboard. We do the same later with each side (2). After sticking it should look like the image below:
Then cover the entire lower piece (the blank page) paper and glue tekturkę:
carefully arrange the paper and cardboard in the middle of the button, smooth and remove all excess glue underneath. Likewise, prepare a second tekturkę. We should get two parts of the cover like the image below:
With bindownicy do holes in the our covers.
cards that are going to put inside the notebook, we will cut to the desired size. My covers are smaller than 1 cm along the long sides and 0.5 cm along the shorter side. Then use the holes do bindownicy spring.
We put on the cover (external sites to measure), we prepared the underside of the paper, and assume the spring:
With bindownicy squeeze the spring, and translate cover.
That is ready to decorate a notebook, which is then chosen by us decorate accessories, according to your wishes.
Happy decorating! :)
